فیلترها/جستجو در نتایج    

فیلترها

سال

بانک‌ها




گروه تخصصی











متن کامل


اطلاعات دوره: 
  • سال: 

    1402
  • دوره: 

    23
  • شماره: 

    10
  • صفحات: 

    245-248
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    68
  • دانلود: 

    3
چکیده: 

دبی سنج مکانیکی یکی از ابزارهای پرکاربرد در صنایع مختلف همچون صنعت نفت است. در دبی سنج مکانیکی از یک جفت چرخدنده اوال استفاده می شود. مهمترین مسئله در چرخدنده اوال عدم یکنواختی در شکل دندانه آن است. این عدم یکنواختی برای جلوگیری از تداخل چرخدنده ها در هم است به همین دلیل مشابه چرخدنده گرد نمی توان چرخدنده تراشی کرد. برای ماشینکاری چرخدنده اوال نیازمند طراحی ابزار یا استفاده از روش وایرکات است. در نتیجه نیازمند شناخت پروفیل دندانه های چرخدنده اوال می باشد. از اینرو در این مقاله به بررسی روابط حاکم بر چرخدنده های اوال پرداخته شده است. در این روابط تعداد دندانه ابعاد هندسی و معادلات حرکت بررسی شده است. سپس با استفاده از نرم افزار گیراوتیکس و به کمک نتایج روابط چرخدنده ها مدل شده است شرایط تداخل دو چرخدنده در این نرم افزار بررسی شده است در نهایت با استفاده از نرم افزار کامسول برای حالت مناسب تحلیل تنشی چرخدنده انجام شد. به کمک مدل ایجاد شده امکان تولید این چرخدنده با استفاده از روش وایرکات وجود دارد.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 68

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 3 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1390
  • دوره: 

    2
  • شماره: 

    2
  • صفحات: 

    1-13
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    1544
  • دانلود: 

    286
چکیده: 

این تحقیق با هدف ارزیابی مشخصه های (پارامترهای) تاثیرگذار بر کیفیت سطح چوب پالونیا در فرآیند ماشین کاری CNC انجام گرفت. به همین منظور چوب مورد نیاز از گرده بینه های پالونیای موجود در کارگاه دانشکده چوب و کاغذ تهیه شد. سپس به کمک اره نواری برش های اولیه انجام گرفت. به منظور خشک کردن نمونه ها در هوای آزاد، الوارها در فضای سرپوشیده داراب بندی شدند. در نهایت نمونه ها به ابعاد  2.5x10x15سانتیمتر تبدیل و برای برشکاری با دستگاه CNC آماده شدند. پنج عامل متغیر لحاظ شده در این تحقیق به صورت زیر در نظر گرفته شد: شتاب برش در 2 سطح  15.07و 8.37 متر در ثانیه، شتاب تغذیه در دو سطح 6 و 12 متر در دقیقه، عمق برش در دو سطح 1 و 5 میلیمتر، روش کار به دو صورت همراه و مقابل و الگوی برش به دو صورت در جهت مماسی و شعاعی. ناهمواری سطح لبه نمونه های برش خورده با استفاده از روش نیمرخ سنجی (پروفیلومتری) و بر پایه استاندارد 13565 ISO اندازه گیری شد. به منظور ارزیابی کیفیت سطح از مشخصه های میانگین(Ra) ، بیشینه(Rmax) ، عمق بیشینه زیر خط میانگین (Rv) و ارتفاع بیشینه بالای خط میانگین (Rp) استفاده شد. میزان تاثیر مشخصه های مورد بررسی، بوسیله آزمون فاکتوریل شکسته، در قالب طرح کاملا تصادفی با %95 اطمینان مورد ارزیابی قرار گرفت. نتایج نشان داد که شتاب برش، روش کار و شتاب تغذیه بر کیفیت سطح ایجاد شده پس از برش موثر بود یا به عبارت دیگر اثر معنی داری بر مشخصه های زبری سطح داشت. بدین صورت که با افزایش شتاب برشی و کاهش شتاب تغذیه مقادیر مشخصه های زبری کاهش یافت و باعث افزایش کیفیت سطح شد. روش کار مقابل باعث افزایش مقادیر مشخصه های زبری و در نهایت افزایش زبری سطح نمونه ها شده است. البته شایان ذکر است روش کار در مقایسه با دیگر مشخصه های برشی تاثیر بیشتری بر زبری سطح داشته است. دیگر عامل های مورد ارزیابی نیز به طور مستقل در سطح 95 درصد تاثیر معنی داری بر مشخصه های زبری نداشته اند. در نهایت برای دستیابی به کیفیت سطح بهینه در این تحقیق، شتاب برش 15.07 متر در ثانیه، شتاب تغذیه 6 متر در دقیقه، روش کار همراه و عمق برش 1 میلیمتر در مقطع مماسی پیشنهاد شد.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 1544

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 286 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    2010
  • دوره: 

    6
  • شماره: 

    10
  • صفحات: 

    1-15
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    327
  • دانلود: 

    0
چکیده: 

This paper presents a mathematical model that could assist in measuring, monitoring and controlling temperature variation in cold and ‘red-hot’ metal working conditions of machining. A numerical analysis technique of the temperature distribution, based on the theory of complex applied potential, was carried out using the principles of relationship analysis between the paths of heat supply in Cartesian plane when the heat path supplied to the material is orthogonal. The high level of temperature involved may effectively be predicted if a mathematical relationship that predicts the pattern of temperature distribution in a material is available. A case study example in a machining workshop is given. Simulation experiments are then carried out using Monte Carlo to increase the confidence in decision-making and provide data for significance testing. This was used as an input for testing for significance. Sensitivity analyses were also carried out in order to observe the degree of responsiveness of model parameters to changes in value. In all, five pairs of comparison were carried out among different workpiece materials. There are significant differences between workpiece materials made of steel and copper, copper and zinc, copper and aluminum. However, no significant differences exist in the model behavior of steel and aluminum, steel and zinc. It was observed that parameters are highly sensitive to changes in value. The framework could possibly be applied to milling and surfacing activities in the engineering workshop. This contribution may be helpful to small-scale enterprises that could not afford sophisticated and very expensive facilities.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 327

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
اطلاعات دوره: 
  • سال: 

    2022
  • دوره: 

    11
  • شماره: 

    2
  • صفحات: 

    61-69
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    56
  • دانلود: 

    0
چکیده: 

In the present study, experimental investigations were conducted to find out the effect of abrasive water jet machining (AWJM) process parameters on the surface roughness (Ra) of white Makrana Marble. The approach was based on Taguchi’, s method and analysis of variance (ANOVA) to optimize the AWJM process parameters for effective machining. Nozzle transverse speed, water pressure, and stand of distance were selected as the input parameters while the other was kept constant. It was found that the water pressure and nozzle transverse speed were significant control factors and the stand of distance was the insignificant control factor in controlling the surface roughness (Ra).

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 56

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1401
  • دوره: 

    9
  • شماره: 

    5
  • صفحات: 

    13-22
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    119
  • دانلود: 

    27
چکیده: 

براساس نتایج پژوهش های انجام گرفته بیش از 50% هزینه تمام شده قطعات سرامیکی مربوط به هزینه­ ی ماشینکاری می باشد، این درحالیست که در مورد نیترید سیلیسیم (Si3N4) که یکی از مهمترین سرامیک های مهندسی است، این مقدار تا 80% گزارش شده است. این سرامیک ترکیبی از خواص مطلوب مانند مقاومت به سایش، خوردگی و سختی بالا را دارا می باشد. با توجه به فرسایش زیاد ابزار در ماشینکاری سرامیک ها، استفاده از روش های سنتی ماشینکاری مناسب نیستند. فرآیند ماشینکاری تخلیه ­ی الکتریکی روشی است که می تواند تمامی مواد رسانا را بدون توجه به خواص مکانیکی و متالورژیکی ماشینکاری نماید، اما ماشینکاری سرامیک های نارسانا از جمله نیترید سیلیسیم بصورت معمول با این روش امکان پذیر نمی باشد. لذا در این تحقیق جهت انجام ماشینکاری تخلیه الکتریکی این سرامیک از روش الکترود کمکی استفاده شده است بدین صورت که پس از ساخت نمونه های سرامیکی، پوشش دولایه مس-کربن و تک لایه مس بر روی نمونه ها قرار داده شد و قطعات با موفقیت ماشینکاری شدند. جهت بررسی بیشتر از سطح حفره ماشینکاری شده توسط میکروسکپ الکترونی تصویربرداری انجام گرفت و الگوی توزیع عناصر نیز تهیه گردید. نتایج نشان دهنده افزایش نرخ براده برداری در حالت پوشش دولایه نسبت به پوشش تک لایه می باشد. همچنین پس از اتمام ماشینکاری، از سطح قطعات سرامیکی و ابزار مس، آنالیز EDX انجام شد که نشان دهنده وجود عناصر کربن و مس در سطح ماشینکاری شده می باشد. علاوه بر این، فرسایش نسبی ابزار مسی در حالت پوشش دولایه کمتر می باشد.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 119

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 27 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    2021
  • دوره: 

    14
  • شماره: 

    3
  • صفحات: 

    17-24
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    115
  • دانلود: 

    0
چکیده: 

In this study, Rotational Chemical Machining (RCM) as a novel machining process is introduced. The properties such as surface roughness and residual stress as well as fatigue strength of the RCM process are evaluated, discussed and compared to the conventional turning process. In this sense, Scanning Electron Microscope (SEM) and Atomic Force Microscope (AFM) were utilized. The results show the superiority of the RCM method over the conventional method and eliminate limits of process such as low surface quality and improve fatigue strength. The Amplitude Distribution Curve has a balanced Gaussian shape in RCM indicating the balanced distribution of peaks and valleys on machined surface. Due to the absence of machining force in the RCM process, in comparison to the turning process, maximum residual stress is significantly decreased from 363Mpa to 71Mpa; surface roughness reduced from 3. 1µ m to 1. 5 µ m as well as the fatigue strength improved 20% approximately.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 115

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources
نویسندگان: 

Karamhabibpour Karam | Salahshoor Esmat

اطلاعات دوره: 
  • سال: 

    1401
  • دوره: 

    13
  • شماره: 

    1
  • صفحات: 

    105-140
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    193
  • دانلود: 

    18
چکیده: 

The present research studied the (causal, contextual, and intervening) conditions, strategies, and consequences of violence in the lives of child wives in Chabahar city, conducted with a qualitative methodology based on grounded theory. For this purpose, in-depth semi-structured interviews were conducted with 28 child-married girls in Chabahar city who were selected through theoretical sampling and snowball method. The analysis of the data in the framework of the three-level open, axial and selective coding system showed that gendered inequality and discrimination, women's inferiority, men's value, the culture of silence and the culture of violence play a role in the experience of child-wives in terms of violence (causal conditions), which leads to a type of increased, double violence for them (core category); violence that operates within the framework of the family institution, the main mechanism of which are previous traditions and rules, and the perpetrators of which are men and women who were themselves the victims of the same traditions and rules that they have, now, internalized and used again against their daughters. This increased violence happens in a context where patriarchy is widespread (contextual conditions) and due to the generalized self-deprecation among child wives (intervening conditions), they may attempt to escape, get separated, threaten, and commit suicide (strategies), and these actions have consequences such as symbolic, physical, and sexual violence and even social isolation (consequences).

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 193

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 18 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1402
  • دوره: 

    23
  • شماره: 

    10
  • صفحات: 

    95-100
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    59
  • دانلود: 

    5
چکیده: 

کنترل و بهینه­سازی زبری سطح و نیروی ماشین کاری برای مواد سخت­کاری شده بسیار ضروری است. برای این منظور می­توان از روش­های هوشمند مبتنی بر مدل­های پیش­بینی و بهینه­سازی استفاده کرد. در این پژوهش پارامترهای ماشین کاری شامل سرعت برشی، نرخ پیشروی و زمان ماشین کاری توسط شبکه عصبی مصنوعی برای ارزیابی زبری سطح و نیروی ماشین کاری، در تراشکاری فولاد سخت کاری شده 4140 مورداستفاده قرار گرفت. طراحی آزمایش ها به روش فاکتوریل کامل در قالب 27 آزمایش صورت گرفت و از ابزار کاربید سمانته بدون پوشش TCMW 16T304 H13A در تراشکاری استفاده شد و زبری سطح و نیروی ماشین کاری اندازه­گیری شد. معماری بهینه با دولایه پنهان برای مدل شبکه عصبی مصنوعی انتخاب شد و برای پیش­بینی جداگانه زبری سطح و نیروی ماشین کاری استفاده شد. مقادیر پیش­بینی مدل شبکه عصبی مصنوعی با نتایج تجربی مقایسه شد و میانگین درصد خطای داده­های اعتبارسنجی برای زبری سطح و نیروی ماشین کاری به ترتیب برابر با 25/4 و 11/5 درصد محاسبه شد و در انتها پارامترهای بهینه برش به طوری که زبری سطح و نیروی ماشین کاری در پایین­ترین سطح باشند، انتخاب شد.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 59

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 5 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
اطلاعات دوره: 
  • سال: 

    1394
  • دوره: 

    15
  • شماره: 

    13 (ویژه نامه)
  • صفحات: 

    59-63
تعامل: 
  • استنادات: 

    1
  • بازدید: 

    907
  • دانلود: 

    222
چکیده: 

لطفا برای مشاهده چکیده به متن کامل (PDF) مراجعه فرمایید.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 907

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 222 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 1 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
نویسندگان: 

JAFARIAN FARSHID | Mohseni Emad

اطلاعات دوره: 
  • سال: 

    2020
  • دوره: 

    13
  • شماره: 

    1
  • صفحات: 

    83-90
تعامل: 
  • استنادات: 

    0
  • بازدید: 

    167
  • دانلود: 

    0
چکیده: 

AISI H13 die steel is widely used in different industries because of its especial properties. During the machining of hard materials, some of the mechanical properties of the material are changed due to the generation of intensive thermo-mechanical loads and plastic deformation into the workpiece. Controlling these intensive changes in machined surfaces is an important task and significantly affects the performance of the machined part. In addition, surface roughness is one of the aspects of surface texture and affects the fatigue life of the material. Since machining of hard materials is a difficult procedure and it is confronted with several limitations, new methods in machining processes are essential to be developed. One of these methods is using cryogenic coolant where the machining temperature may be considerably reduced by spraying liquid nitrogen on the cutting region. Based on this, at the present study, the variation of thermal loads and surface roughness at different machining parameters were evaluated under dry and cryogenic conditions. To do this, a thermal infrared camera and liquid nitrogen delivery system was used during the machining of hardened AISI H13 steel. Compared with dry condition, the effectiveness of the cryogenic coolant on surface roughness and thermal loads were analysed and discussed at different cutting speed, feed rate, and depth of cut. Finally, it was found that, applying cryogenic coolant in machining of AISI H13 die steel can be very effective to enhance performance and quality of the machined component in terms of surface roughness and thermal loads.

شاخص‌های تعامل:   مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resources

بازدید 167

مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesدانلود 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesاستناد 0 مرکز اطلاعات علمی Scientific Information Database (SID) - Trusted Source for Research and Academic Resourcesمرجع 0
litScript
email sharing button
telegram sharing button
whatsapp sharing button
linkedin sharing button
twitter sharing button
email sharing button
email sharing button
sharethis sharing button